ADVM-FD1 FORD SYNC3
4
USER GUIDE
HDMI Access
Connect the USB dongle supplied to the Sync USB input**. Select USB source from the OEM
menu sources. The dongle will appear as ‘USB AUX’.
Hold
BUTTON 1
for 2 seconds to switch between OEM screen and Adaptiv Mini HDMI screen
Rear and Front Camera Access
From either HDMI mode or OEM mode
1. Select reverse gear for reverse camera
2. Deselect reverse gear - will go to after market front camera ( if DIP 2 ON )
Press top right corner of screen to cancel front camera or drive over 10 MPH
Front Camera Access
Hold
BUTTON 2
for 2 seconds to enter the front camera screen ( if DIP 2 is ON )
or double press
SOUND
button on OEM head unit.
View Version Number
Hold
BUTTON 1 Button for 8 seconds to enter firmware information screen
**Note that there may be a slight delay in HDMI audio lip sync , due to the USB audio buffer time of the OEM system. This is
dependant on manufacturer original equipment specification.
Hold
BUTTON 2
( or press top right corner of touch screen ) to disable the video in
motion warning message
Video In Motion Warning - 10 MPH
Button Configuration
Button 1 - Left arrow (steering wheel)
or
SOUND button on OEM head unit
Button 2 - Right arrow (steering wheel)
