Adaptec FC4100 Installation & User Manual Download

Page: 82 / 91

A-4

Configuring the RAID Controller (FS4500 only)

See the referenced page numbers for more information on any
menu item:

■

Quick Installation (see

page A-4

)

■

View and edit logical drives (see

page A-5

)

■

View and edit logical volumes (see

page A-5

)

■

View and edit host LUNs (see

page A-6

)

■

View and edit drives (see

page A-7

)

■

View and edit channels (see

page A-8

)

■

View and edit configuration parameters (see

page A-9

)

■

View and edit peripheral devices (see

page A-11

)

■

System functions (see

page A-11

)

■

View system information (see

page A-12

)

■

View and edit event logs (see

page A-12

)

Quick Installation Option

This option creates a logical drive with minimal user input. It
prompts for the RAID level, and in a single shelf uses all the drives
and assigns a LUN number of 0 to the logical drive.

Summary of Contents for FC4100




























































































Search results

Summary of Contents for FC4100

Reviews:

Related manuals for FC4100

Brands by name

Popular brands

Adaptec FC4100, Installation & User Manual

Search results

Summary of Contents for FC4100

Reviews:

Related manuals for FC4100

Brands by name

Popular brands