2-5
Installing the Storage Enclosure
3
Secure the rear rails you selected to the rear supports of the
equipment rack, using the supplied screws, as shown in
.
4
Secure the front rails to the rear rails, as shown in
Figure 2-2 Securing the Front Rails to the Rear Rails
5
Tighten all the screws before continuing.
6
Carefully remove the rack ear plastic covers from the Storage
Enclosure. (They will be re-used.)
7
With assistance from a second person, lift the Storage Enclosure
and, from the front of the rack, slide the rear of the enclosure
onto the rails. Slide the enclosure all the way back until it rests
completely on the rails, as shown in
