Adaptec Command Line Utility User Manual Download Page 36

Page: 36 / 38

Chapter 2: Using the Command Line Utility

●

arcconf setstatsdatacollection

Enables or disables statistics collection for a controller. To display the statistics, use the

arcconf

getlogs

command (see

page 23

Syntax

ARCCONF SETSTATSDATACOLLECTION <Controller#> Enable|Disable

Parameters

Controller# is the controller number.

Enable turns statistics collection on.

Disable turns statistics collection off.

Example

ARCCONF SETSTATSDATACOLLECTION 1 ENABLE

arcconf setvmcredential

Resets the Hypervisor login credentials for

VMware Guest OSs running Remote ARCCONF

Note:

This command is available for VMware Guest OSs running Remote ARCCONF only.

Syntax

SETVMCREDENTIAL <Esxip> <Esxcimomport> <Esxuserid> <Esxpassword> [noprompt]

Parameters

Esxip

is the Hypervisor IP address.

Esxcimomport

is the Hypervisor CiMOM port number.

Esxuserid

is the Hypervisor user name.

Esxpassword is the Hypervisor password.

Example

ARCCONF SETVMCREDENTIAL 172.18.46.101 5989 root passwd

arcconf task

Performs a task on a logical drive or a physical drive.

Syntax

ARCCONF TASK

TASK START <Controller#> LOGICALDRIVE <LogicalDrive#> <options> [noprompt]

TASK STOP <Controller#> LOGICALDRIVE <LogicalDrive#>

TASK START <Controller#> DEVICE <Channel> <ID> <options> [noprompt]

TASK STOP <Controller#> DEVICE <Channel> <ID>

Parameters

Controller# is the controller number

LogicalDrive# is the number of the logical drive in which the task is to be performed

Summary of Contents for Command Line Utility







































Search results

Summary of Contents for Command Line Utility

Reviews:

Related manuals for Command Line Utility

Brands by name

Popular brands

Adaptec Command Line Utility, User Manual

Search results

Summary of Contents for Command Line Utility

Reviews:

Related manuals for Command Line Utility

Brands by name

Popular brands