Verify each external SCSI peripheral you are installing has a
unique SCSI ID from 0 to 6. Refer to the peripheral’s documen-
tation to determine the SCSI ID setting.
If any two SCSI peripherals you are connecting to the SCSI Card 1505
share the same SCSI ID, change the SCSI ID on one peripheral. The
SCSI Card 1505 is preset to SCSI ID 7 and
should not be changed. See the SCSI Card
1505 User’s Reference (page 2, SCSI IDs)
for additional information on
SCSI IDs.
The SCSI ID is usually
set with a switch on the
back of the peripheral.
7
Connect a power cable from your computer’s power supply to
the power input connector on each SCSI peripheral.
Replace your computer cover.
If you are installing external SCSI peripherals, continue with
the next section; otherwise, skip to Installing the SCSI Card
1505 Software.
S
TEP
8
S
TEP
9
Power Input Connector on the Back
of the Peripheral
Power Cable (From the Power Supply
Inside the Computer)
C
ONNECTING
E
XTERNAL
SCSI P
ERIPHERALS
S
TEP
1
SCSI ID Switch
