6
Installing and Connecting Devices
You will need one SATA cable and one standard or SATA power cord for
each SATA device you plan to connect to your ASH-1205SA. (Refer to
your device’s documentation to determine which type of power cord to
use.)
One SATA cable is included in your SATAConnect kit.
You can connect a maximum of two SATA devices to your ASH-1205SA,
one to each connector on the card.
To complete the installation:
1
If your computer is not already open, follow the instructions
provided in
2
Mount the first device in an available bay inside your computer.
Refer to the computer’s documentation for instructions.
3
Plug one end of the SATA cable into Connector 1 on the ASH-1205SA.
4
Plug the other end of the SATA cable into the SATA port on your
device.
5
Repeat
to install a second device, using Connector 2.
6
Connect a power cord to each device. (Refer to your device’s
documentation to determine which type of power cord to use.)
7
Close the computer cabinet, reattach the power cord, then power on
your computer.
Continue with
Installing the ASH-1205SA Driver
.
