background image

vii

7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon which the 

Software is furnished will be free from defects in material or workmanship under normal 
use and service for a period of thirty (30) days from the date of delivery to you. ADAPTEC 
AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR 
RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. THE 
FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS 
LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR THE 
FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS MAKE NO 
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED, AS TO 
NON-INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE. Some states do not allow the exclusion of implied 
warranties or limitations on how long an implied warranty may last, so the above 
limitations may not apply to you. This warranty gives you specific legal rights and you may 
also have other rights which vary from state to state.

8. The entire liability of Adaptec and its licensors, and your exclusive remedy for a breach of 

this warranty, shall be: 

 a. The replacement of any media not meeting the above limited warranty which is 

returned to Adaptec; or: 

 b. If Adaptec or its distributor is unable to deliver replacement media which is free from 

defects in materials or workmanship, you may terminate this Agreement by returning 
the Software and your money will be refunded.

9. Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO 

YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES, 
INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF 
ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. Some states do not allow the 
exclusion or limitation of special, incidental, or consequential damages, so the above 
limitation or exclusion may not apply to you.

10. Export. You acknowledge that the laws and regulations of the United States and other 

countries may restrict the export and re-export of the Software. You agree that you will not 
export or re-export the Software or documentation in any form in violation of applicable 
United States and foreign law.

11. Government Restricted Rights. The Software is subject to restricted rights as follows. If the 

Software is acquired under the terms of a GSA contract: use, reproduction or disclosure is 
subject to the restrictions set forth in the applicable ADP Schedule contract. If the Software is 
acquired under the terms of a DoD or civilian agency contract, use, duplication or disclosure 
by the Government is subject to the restrictions of this Agreement in accordance with 
48 C.F.R. 12.212 of the Federal Acquisition Regulations and its successors and 
49 C.F.R. 227.7202-1 of the DoD FAR Supplement and its successors.

12. General. You acknowledge that you have read this Agreement, understand it, and that by 

using the Software you agree to be bound by its terms and conditions. You further agree that 
it is the complete and exclusive statement of the agreement between Adaptec and you, and 
supersedes any proposal or prior agreement, oral or written, and any other communication 
between Adaptec and you relating to the subject matter of this Agreement. No additional or 
any different terms will be enforceable against Adaptec unless Adaptec gives its express 
consent, including an express waiver of the terms of this Agreement, in writing signed by an 
officer of Adaptec. You assume full responsibility for the use of the Software and agree to 
use the Software legally and responsibly. This Agreement shall be governed by California 
law, except as to copyright matters, which are covered by Federal law. This Agreement is 
deemed entered into at Milpitas, California by both parties. Should any provision of this 
Agreement be declared unenforceable in any jurisdiction, then such provision shall be 
deemed severable from this Agreement   and shall not affect the remainder hereof. All rights 
in the Software not specifically granted in this Agreement are reserved by Adaptec.

Should you have any questions concerning this Agreement, you may contact Adaptec by 
writing to: 

Adaptec, Inc.
Legal Department
691 South Milpitas Boulevard
Milpitas, California 95035.

Summary of Contents for APD-2930























Reviews: