4
Quick Reference: Array Software
Part Number: 510893-00, Rev. B
Print Spec Number: 493983-00
Current Date: 3/1/99
ECN Date: 3/19/96
Array Driver Copy Utility
The Adaptec Array Driver Copy Utility is on the
AHA-3980/3985 Drivers and Raid Utilities diskette
included with the AHA-398x adapter. You use this
utility to copy DOS and NetWare drivers to your
hard disk drive. These drivers are required to oper-
ate arrays under NetWare. You need the DOS driv-
ers if you want to install NetWare or other software
from a SCSI CD-ROM drive connected to your
AHA-398x adapter.
See the AHA-3980/3980W/3985/3985W User’s Guide
for instructions on how to use the Adaptec Array
Driver Copy Utility to install these drivers.
Administrator Utility
This section describes the most frequently used
options in the Administrator Utility. For complete
information on all options, see the AHA-3980/3980W/
3985/3985W User’s Guide.
Starting and Exiting the Utility
To start the Administrator Utility:
1
If the server is not running, start it.
2
At the server prompt, enter
load aruadmin
(
load
c:aruadmin
if loading for the first time).
To exit the Administrator Utility:
1
Press Esc until the prompt
Do you want to exit the
Administrator? (y|n)
appears.
2
Type
y
. You return to the server prompt.
The Main and System Menus
The Main menu is the primary Administrator Utility
menu. If the system has only one array, the Main
menu appears when you start the Administrator util-
ity. If the system has multiple arrays, the System
menu appears first. In this case, follow these steps to
display the Main menu:
1
From the System menu, select Select Target
Array
.
4
5
