8
9
Close the computer cabinet.
Do not
reconnect the power cord yet.
If you are also connecting external SCSI devices, skip to the next
section,
Connecting External SCSI Devices
.
If you are not connecting external SCSI devices, complete the
installation by continuing with Step 10.
10
Reconnect the power cord, then turn on the computer.
11
Install the software driver for your operating system. See
Installing
Drivers
on page 11
for more information.
Refer to the
SCSI Card 2930CU User’s Guide
on the SCSI Card 2930 CD for
useful information on SCSI, SCSI devices, and using SCSI
Select
.
Connecting External SCSI Devices
The SCSI Card 2930CU has one 50-pin high-density external connector.
You will need a high-quality 50-pin high-density external SCSI cable for
each external SCSI device you are connecting. External SCSI cables are
not included in the SCSI Card 2930CU kit. Refer to the
SCSI Card 2930CU
User’s Guide
on the SCSI Card 2930 CD for more information on cables.
