3-18
AHA-2740W/2742W/2744W User’s Guide
AHA-2740W/2742W/2744W User’s Guide
Stock Number: 510647-00, Rev. A
Page: 3-18
Print Spec Number: 492897-00
Current Date: 8/3/94
ECN Date: 8/9/94
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Note:
If many drives are set to yes for the SCSI Start Unit
Command, system boot time will vary depending on how
long each drive takes to spin up.
Exit SCSI Device Configuration
When configuration of SCSI devices is complete, press Esc to Exit
SCSI Device Configuration; you will be prompted to either save or
abandon device configurations, as shown in Figure 3-15.
Exit the EISA Configuration Utility
Once the host adapter and SCSI devices are properly configured,
save and exit the ECU as instructed on the screen's menu. The fol-
lowing section, Utilities, describes the utilities available in the ECU.
Utilities
Select Utilities from the ECU to access the utilities that are available
with your host adapter, as shown in Figure 3-15.
Caution
Do you want to SAVE or ABANDON the
current device configuration?
<SAVE=ENTER> or <ABANDON=ESC>
Figure 3-15. Exiting SCSI Device Configuration
Figure 3-16. Utility Selection
AIC-7770 Utility Selection Options
( ) Disk Format Utility
<ESC>
