Snap Server® 4400 SCSI Card
Snap Server 4400
4
Field Service Documentation
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Replacing the Cover
1
Lower the top cover onto the server so the front edge of the cover is about 1 inch
from the edge of the bezel.
Caution
Be sure to replace the top cover. Do not operate the server without the
top cover in place.
2
Slide the front edge of the cover all the way forward until it snaps into place.
Restoring Power to the Server
1
If you disconnected the Ethernet cable(s), reattach them to the server.
2
Connect the power cord.
3
Press the power button on the front of the server.
Power button
