background image

Windows Networking Configuration

Chapter 2  Network Access to the Server

29

Windows Networking Configuration

Windows SMB and security settings are configured on the 

Network > Windows

 

screen of the Administration Tool.

Topics include:

• Support for Windows Networking (SMB)
• Support for Windows Network Authentication

Support for Windows Networking (SMB)

The default settings make the SnapServer available to SMB clients in the workgroup 

named 

Workgroup

. Language support is set to North America/Europe (code page 

850); opportunistic locking is enabled, as is participation in master browser 

elections. See the online help for details in configuring these options.
Consider the following when configuring access for your Windows networking 

clients.

Windows Networking File and Folder Name Support 

In Windows networking, most file and directory names are transmitted as a 2-byte 

(16-bit) UCS-2 character set. However, this is not true in every case. Some are still 

sent via a single byte character set. The Language Support option selected for 

Windows networking clients is used only to enable the server to accept file and 

folder names in a single byte character set.

Caution  

When Unicode is disabled, do not name files and folders in character sets 

not included in this list (e.g., Cyrillic). Such files and folders may be impossible to 

open or delete. 

Support for Microsoft Name Resolution Servers 

The SnapServer supports both of the Microsoft name resolution services: Windows 

Internet Naming Service (WINS) and Dynamic Domain Name System (DDNS). 

However, when you use a domain name server with a Windows Active Directory 

(ADS) server, make sure the forward and reverse name lookup is correctly set up. 

ADS can use a UNIX BIND server for DNS as well.

ShareName$ Support 

GuardianOS supports appending the dollar-sign character ($) to the name of a share 

in order to hide the share from SMB clients accessing the SnapServer. 

Note  

As with Windows servers, shares ending in '$' are not truly hidden, but rather 

are filtered out by the Windows client. As a result, some clients and protocols can 

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews: