manualshive.com logo in svg

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

The Adaptec 5325301507 - Snap Server 4400 NAS is a powerful storage solution for your business needs. Make the most out of its features by referring to the comprehensive Administrator's Manual. Download this manual for free from our website and unlock the full potential of this remarkable product.

Share
Download
background image

Configuring Share Access

Chapter 6  Share and File Access

105

Configuring Share Access  

The GuardianOS supports share-level as well as file- and directory-level 

permissions (see “Windows ACLs” on page 107) for all local and Windows domain 

users and groups. 

Share Access Behaviors

Administrators tasked with devising security policies for the SnapServer will find 

the following share access behaviors of interest:

• Share access defaults to full control — 

The default permission granted to users 

and groups when they are granted access to the share is full control. You may 

restrict selected users and groups to read-only access.

• User-based share access permissions are cumulative — 

An SMB, AFP, HTTP, or 

FTP user's effective permissions for a resource are the sum of the permissions 

that you assign to the individual user account and to all of the groups to which 

the user belongs in the Share Access page. For example, if a user has read-only 

permission to the share, but is also a member of a group that has been given full-

access permission to the share, the user gets full access to the share.

• NFS access permissions are not cumulative — 

an NFS user's access level is based 

on the permission in the NFS access list that most specifically applies. For 

example, if a user connects to a share over NFS from IP address 192.168.0.1, and 

the NFS access for the share gives read-write access to 

*

 (All NFS clients) and 

read-only access to 192.168.0.1, the user will get read-only access.

• Interaction between share-level and file-level access permissions — 

When both 

share-level and file-level permissions apply to a user action, the more restrictive 

of the two applies. Consider the following examples:

Example A: 

More restrictive file-level access trumps more permissive share-level 

access.

Share Level

File Level

Result

Full control

Read-only to FileA

Full control over all directories and files in 
SHARE1 

except

 where a more restrictive file-level 

permission applies. The user has read-only 
access to FileA.

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews:

No comments

Related manuals for 5325301507 - Snap Server 4400 NAS

Oracle DE2-24 Customer Service Manual preview
DE2-24
Brand: Oracle Pages: 312
IBM eServer 342 xSeries Installation Manual preview
eServer 342 xSeries
Brand: IBM Pages: 70
IEI Technology PUZZLE-IN003A User Manual preview
PUZZLE-IN003A
Brand: IEI Technology Pages: 89
IBM System x3250 M3 Type 4251 Manual preview
System x3250 M3 Type 4251
Brand: IBM Pages: 32
Angel Cool Aironet 1200 Quick Start Manual preview
Aironet 1200
Brand: Angel Cool Pages: 2
IBM x3100 M5 Type 5457 Installation And Service Manual preview
x3100 M5 Type 5457
Brand: IBM Pages: 688
IBM 3401-A00 Appliance Manual preview
3401-A00
Brand: IBM Pages: 44
Freund FE-W826-T2 Setup Manual preview
FE-W826-T2
Brand: Freund Pages: 6
Digisol DG-BG4100NU Quick Installation Manual preview
DG-BG4100NU
Brand: Digisol Pages: 22
TP-Link TL-MR3620 Installation Manual preview
TL-MR3620
Brand: TP-Link Pages: 2
XAVI Technologies Corp. X7822r User Manual preview
X7822r
Brand: XAVI Technologies Corp. Pages: 63
Sollae Systems CSE-H20 User Manual preview
CSE-H20
Brand: Sollae Systems Pages: 45
IBM System x3500 M2 Type 7839 Installation And User Manual preview
System x3500 M2 Type 7839
Brand: IBM Pages: 126
3Com NETBuilder SI Using Manual preview
NETBuilder SI
Brand: 3Com Pages: 212
Interface Masters TAHOE 8824 User Manual preview
TAHOE 8824
Brand: Interface Masters Pages: 34
H3C WT2024-U-PWR Compliance And Safety Manual preview
WT2024-U-PWR
Brand: H3C Pages: 51
NETGEAR DG834GUV5 User Manual preview
DG834GUV5
Brand: NETGEAR Pages: 120
SMC Networks EZ Switch SMC-1026DT V.2 User Manual preview
EZ Switch SMC-1026DT V.2
Brand: SMC Networks Pages: 27

Brands by name

Popular brands

Load more brands