Adaptec 2410SA - Serial ATA RAID Controller Hardware Installation Manual Download

Page: 11 / 14

Europe

■

Visit our Web site at

www.adaptec-europe.com

■

German:

To speak with a Technical Support Specialist, call +49 89 43 66 55 22,

Monday to Friday, 9:00 to 17:00, CET. For support via e-mail, submit your
question to Adaptec’s Technical Support Specialists at

ask-de.adaptec.com

■

French:

To speak with a Technical Support Specialist, call +49 89 43 66 55 33,

Monday to Friday, 9:00 to 17:00, CET. For support via e-mail, submit your
question to Adaptec’s Technical Support Specialists at

ask-fr.adaptec.com

■

English:

To speak with a Technical Support Specialist, call +49 89 43 66 55 44,

Monday to Friday, 9:00 to 17:00, GMT. For support via e-mail, submit your
question to Adaptec’s Technical Support Specialists at

ask.adaptec.com

■

You can order Adaptec cables online at

www.adaptec.com/buy-cables

Japan

■

Visit our Web site at

www.adaptec.co.jp

■

To speak with a Technical Support Specialist, call +81 3 5308 6120,
Monday–Friday, 9:00

. to 12:00

and 1:00

. to 6:00

2410SA Enclosure Kit HIG.fm Page 10 Thursday, October 23, 2003 1:20 PM

Summary of Contents for 2410SA - Serial ATA RAID Controller















Search results

Summary of Contents for 2410SA - Serial ATA RAID Controller

Reviews:

Related manuals for 2410SA - Serial ATA RAID Controller

Brands by name

Popular brands

Adaptec 2410SA - Serial ATA RAID Controller, Hardware Installation Manual

Search results

Summary of Contents for 2410SA - Serial ATA RAID Controller

Reviews:

Related manuals for 2410SA - Serial ATA RAID Controller

Brands by name

Popular brands