10-4
Adaptec Ultra320 SCSI Cards User’s Guide
Loading the Driver at Server Bootup
To automatically load the
adpu320.ham
at server bootup, the
startup.ncf
file (usually located in your server’s startup directory)
must contain a
load
command line that specifies the location of the
driver and any appropriate command line options (see
Load Command Line Options on page 10-5
). For additional
information on the
startup.ncf
file, refer to your NetWare
documentation.
The correct syntax to load the driver is:
load [pathname]adpu320.ham [options]
For example, the command line to load the driver from the
c:\nwserver
directory, with the
verbose=
option on is:
load c:\nwserver\adpu320 verbose=y
Command line options are not case sensitive. Placing commas
between command line options is optional. See
Command Line Options on page 10-5
for possible values.
To modify the
startup.ncf
file, type
load nwconfig
and press
Enter
.
Note:
You can also use your DOS text editor to modify the
startup.ncf
file.
U320 UG.book Page 4 Tuesday, September 23, 2003 1:47 PM
