10-5
Installing the SCSI Driver for Novell NetWare
Using the Load Command Line Options
You can specify several command line options when the driver is
loaded. The available options are described in the table below. This
table describes command line options for the
adpu320.ham
driver
for Ultra320 products.
Warning:
Altering or adding these driver parameters
incorrectly can render your system inoperable. Use them with
caution.
adpu320.ham Command Line Options
Option Name
Default
Value
Acceptable
Values
Definition
SLOT
If none specified,
NeWare prompts you to
choose
Dependent on system
configuration. Obtains a
physical slot number for
the host adapter.
/LUN
N/A
N/A
Scans all possible LUNs.
MAX_TAGS
16
1-128
Maximum number of
tagged I/Os which will
be active per device.
VERBOSE
off
on,y,1,off, n
Displays host adapter
information.
INSTRUMENTATION
off
on,y,1,off, n
Enables/disables
recording of I/O statistics
and errors.
IO_MAPPED
off
on,y,1,off, n
Forces the use of I/O
mapping.
READ_STREAMING
off
on,y,1,off, n
Enables read streaming to
be negotiated for all
drives.
U320 UG.book Page 5 Tuesday, September 23, 2003 1:47 PM
