7
Installing Your Wireless AP
Installing the Wireless AP
Your Wireless AP can fit into your WLAN in multiple ways. It can
be connected to a hub or switch on your network, a router on your
network, or a network adapter that’s installed in a computer on
your network.
To install the Wireless AP:
1
Use the mounting screws to secure the Access Point in place, if
desired.
2
Connect the Ethernet cable to the LAN port on the Access Point.
3
Depending on your network configuration, connect the other
end of the Ethernet cable to the LAN port on:
■
a hub or switch on your network.
■
a router on your network.
■
a network card installed in another computer on your
network.
4
Connect the power adapter to the DC-IN port on the Access
Point (as shown in
), and plug it into a power
outlet.
5
Raise the Access Point’s antennas.
Your Wireless AP is installed. See
Installing the Wireless Access Point
to continue with your next Installation task.
Connect LAN.
:
Connect power.
