Adaptec 19160, Installation Manual

Page: 10 / 20

8
Installation Guide
Plug the nonterminated end of the cable to the internal LVD/SE
connector.
Plug the internal LVD SCSI devices to the other cable connectors,
starting with the connector at the terminated end of the cable.
S
TEP
2
68-pin Internal LVD
SCSI Cable
68-pin Internal LVD/SE Connector
S
TEP
3
Internal LVD SCSI devices come from the factory with
termination disabled and cannot be changed. Proper SCSI
bus termination is provided by the terminator at the end of
the LVD SCSI cable. See
Terminate the Ends of the SCSI Bus
on page 5 for more information.
LVD (e.g., Ultra160 or
Ultra2) SCSI Devices
Built-in Terminator
on Cable Plug First Device
to this Connector
N
OTE
ASC-19160_IG.book Page 8 Wednesday, December 1, 1999 12:47 PM