7
•
For the Power Macintosh system, verified that the card is seen
by the Apple System Profiler?
To verify that the card is seen by the Apple System Profiler,
follow these steps:
1. Pull down from the Apple Menu to Apple System Profiler.
2. Click the
Devices
and
Volumes
tab.
3. In the window that appears, scroll down to the
PCI
area
and click the arrow next to each PCI slot to reveal the PCI
card information. If the AFW-4300 is installed properly,
you will see the following information listed under one of
the slots:
Card type:
Not available
Card name:
pci104c,8010
Card model:
Not available
Card ROM #:
Not available
Card Revision:
0
Card vendor ID:
104C
4. If the card is not seen, verify the Apple FireWire 2.4 or later
extensions are loaded and enabled.
5. If the extensions are loaded and enabled, verify that the
card is seated properly.
If you are still unable to resolve a problem, see the Adaptec Web
site at
http://www.adaptec.com
, or the Adaptec Support
Knowledgebase at
http://ask.adaptec.com
for additional
troubleshooting information.
1394IG.fm Page 7 Thursday, November 9, 2000 8:55 AM
