3-1
3
Installing SCSI Devices
In this Chapter
You can connect a total of seven SCSI devices to the SCSI Card
2930CU. If you are installing more than two internal SCSI devices,
you will need an internal SCSI cable with enough connectors for all
devices.
The SCSI card, and each SCSI device (whether internal or external),
must have a unique SCSI ID. See
SCSI IDs
on page A-2
and refer to
each device’s documentation for more information.
Note:
The card’s SCSI ID is preset to 7 and should not be
changed.
Installing Internal SCSI Devices
You must prepare each internal SCSI device for installation. See
Preparing SCSI Devices for Installation
on page A-4
for detailed
instructions.
If you are connecting only external devices, skip to
Connecting
External SCSI Devices
on page 3-5
.
Installing Internal SCSI Devices
3-1
Connecting External SCSI Devices
3-5
