Adaptec 1460B - APA Storage Controller Fast SCSI 10 MBps, User Manual

Page: 15 / 38

9
Completing the Installation
5
When EZ-SCSI installation is complete, remove the diskette
and reboot your PC to DOS. A drive letter should now be
assigned to your CD-ROM drive.
6
Insert the Windows NT installation CD in the CD-ROM drive
and change to the
\i386 directory on the CD.
7
At the DOS prompt, type winnt /b and press Enter.
8
Install Windows NT by following the instructions that appear
on the screen.
When Windows NT is installed, continue with the next section, If
Windows NT Is Installed on Your PC.
If Windows NT Is Installed on Your PC
You must complete all steps in this section, even though
Windows NT is already installed on your PC. These steps ensure
that the required Windows NT registry changes are made.
1
Be sure that the SlimSCSI adapter is inserted in a PC Card slot
and that the CD-ROM drive is connected to it and is turned
ON
.
2
Start Windows NT on your PC.
3
Double-click the Windows NT Setup program icon in the Main
group.
4
Select Options from the Setup menu bar, then select
Add/Remove SCSI
Adapters. A list of all currently installed
SCSI adapters will appear.
Note:
If Adaptec 151x/152x/AIC-6260/6360 appears
on the list, select it and click Remove.
5
Click Add, then click OK to verify that you want to add an
adapter.
6
When the Select SCSI Adapter Option dialog box appears,
select Other from the Adapter window.
7
Insert the Windows NT/OS2/Windows 95 Driver diskette
(included with your SlimSCSI adapter) in the PC’s floppy
drive. Type
a:\winnt in the dialog box and click OK.