Adaptec 1420SA - Serial ATA II RAID Controller, Quick Installation Manual, Page: 15 / 19

13
Installing the Netware Driver in a New NetWare System
2 Then type:
3 Type:
cd /<directory of rpm files>
4 Type:
rpm -ivh <rpmfile>
(for a new install, or)
rpm -Uvh --force <rpmfile>
(for an updated install)
cd
or
eject
(to eject disc)
5
Reboot the system to enable the new/updated driver.
Installing the Netware Driver in a New
NetWare System
Note: For information about installing drivers if you use the
NetWare CD to install your operating system, see your Novell
documentation.
To install the driver in a new Novell NetWare 6.5 operating
system:
1 Install and configure the controller and disk drives as described in
Installing the Controller and Drives on page 6 .
2 Use the instructions provided in the NetWare manual to begin
the installation.
3 When the
No storage device was detected in this system. Load the
appropriate driver (HAM)
prompt appears, press Enter , then Esc .
for Red Hat
cd /mnt/cdrom
for SuSE
cd /media/cdrom
for Red Hat
umount /mnt/cdrom
for SuSE
umount /media/cdrom
AAR-1420SA QIG.book Page 13 Monday, March 7, 2005 1:30 PM