Adaptec 131U2 - AAA RAID Controller, Installation And Hardware Manual, Page: 59 / 82

6-1
ç
▼ ▼ ▼ ▼
Installing the Software
Driver for SCO UnixWare
In this Chapter
This chapter explains how to install the AAA-131U2/133U2 soft-
ware driver (
cda1000 ) for SCO UnixWare 7.0. Before installing the
driver, make sure you have completed the following:
■
Installed the AAA-131U2/133U2 in your system.
(See Chapter 2)
■
Created the first array using the ARRAYCONFIG U2 utility, if
you plan to boot from an array. (See Chapter 3)
Once UnixWare and the driver are installed, install Adaptec CI/O
Management Software from the server’s X Window (CI/O is
required for array management in order to provide the proper level
of fault tolerance and event notification). Refer to the Adaptec CI/O
Management Software User’s Guide
for instructions on installing and
using the software.
➤
Installing the Array1000U2 Driver for UnixWare
6-2