Adaptec 131CA - AAA RAID Controller, Installation And Hardware Manual

Page: 27 / 62

2-15
Installing the AAA-131CA Adapter and Connecting SCSI Devices
Note:
We recommend that you enable termination power on
all SCSI devices in the computer so that termination power
will still be supplied if you replace one or more drives on
the SCSI bus.
Completing the Installation
Reinstall the computer cover and connect all power cables. To verify
that the SCSI devices work properly, turn on the external SCSI
devices first, then turn on the computer. When the computer boots,
the adapter BIOS sign-on message should appear on the screen, and
each device connected to the adapter should be listed. If the BIOS
message does not appear, see Appendix A, Troubleshooting.
Note: If you need to configure the SCSI options (for exam-
ple, ID, Parity Checking, and Termination) of your system
after the AAA-131CA adapter is installed, see Chapter 5,
Configuring the AAA-131CA Adapter with SCSISelect.
❒