For detailed instructions on how to use the software, please visit
01
PROTON S200
Status Request
Operational Instructions
Action Required
Start recording
Stop recording
Download report
Status request by single click of the button will have the following possibilities:
Only temperature shown.
No REC or END on LCD
Press 3 secs
Press 3 secs
Scan QR/Connect
device through USB
“REC” icon on LCD
“END” icon on LCD
Instruction
LCD display indication observed
Status indicated
Confirmation Indication
04
“REC” stops blinking and
becomes solid after the
pre-cooling period. Solid REC
icon indicates that the device
is recording the temperature.
02
03
Press the button for 3 secs to start the
trip. A blinking “REC” on LCD screen
indicates the start of the trip. Place
the device in the package.
The trip recording starts
only after 30 mins from the
start of the trip. This is the
default preset pre-cooling
period. The trip cannot be
stopped during this
pre-cooling period
05
Press the button for 3 secs to
stop the trip. The LCD screen
shows “END” to indicate that
the trip has been ended.
06
Connect the USB of the data
logger to a PC to access the
PDF and CSV reports.
REC blinking
Static REC
END blinking without bell icon
END blinking with bell
pre-rec mode
REC-delay mode
REC-delay mode
Recording ended and no
violation has been recorded
Recording ended and at
least one violation has been
recorded.
www.adaptloggers.com
+91-8639739890
single
click of
button
02
docs.adaptloggers.com/protons200
Click the button and check
the LCD Screen. If you see
“REC” or “END“ on the
screen, the device is used.