Adamson S10p User Manual Download Page 2

Distribution Date: August 15, 2022

Copyright 2022 by Adamson Systems Engineering Inc.; all rights reserved

This manual must be accessible to the person operating this product.  As such, the product owner must store it in a safe 

place and make it available upon request to any operator.

This manual can be downloaded from

Declarations

EU Declaration of Conformity 

Adamson Systems Engineering declares that the 

products stated below are in conformance with the 

relevant fundamental health and safety criteria of the 

applicable EC Directive(s), in particular:

Signed at Port Perry, ON. CA - August 15, 2022

------------------------------------------------

Brock Adamson (President & CEO)

ADAMSON SYSTEMS ENGINEERING, Inc.

1401 Scugog Line 6

Port Perry, Ontario, Canada

L9L 0C3

T: +1 905 982 0520, F: +1 905 982 0609

Email: [email protected]

Website: www.adamsonsystems.com

S10p User Manual

Directive 2014/35/EU: Low Voltage Directive

963-0008 S10p (70x40)

963-0010 S10p (100x50)

Directive 2006/42/EC: Machinery Directive

934-0034 Sub-Compact Point Source Horizontal Bracket

934-0037 Sub-Compact Point Source Vertical Bracket

932-0045 Point H-Clamp

https://adamsonsystems.com/support/downloads-directory/s-series/s10p

Summary of Contents for S10p










Reviews: