Allow different types of memory cards with small data files to be copied to one disc,
In the example below a USB drive with 100MB of data is used as the first source to
copy to a blank CD-R. When the copy finishes the disc will automatically be ejected.
Remove the USB drive, insert an SD card with 220MB of data as the second source
and copy to the same CD-R. After the copy is done, the CD-R will have two
sessions of data from both the USB drive and the SD card.
ENT
ENT
ENT
ENT
ENT
5
[Flash to Disc]
4. Multi Session
Copy x 1 100M
0% 0M
Result
Pass 1 Fail 0
[Flash to Disc]
4. Multi Session
Copy x 1 220M
0% 0M
Result
Pass 1 Fail 0
1.4 Multi Session
CD disc with two sessions of data
SD card as source
1. Flash to Disc
1. Flash to Disc
[Flash to Disc]
3. Copy+Compare
Write 1/1
119MB
TTL 119MB
89MB
USB as source
&COMP 1/1 119MB
TTL 119MB
89MB
Result
Pass 1 Fail 0
1.3 Copy+Compare
Performs a Copy function followed by a Compare function. Copied discs files are
compared to the flash media bit for bit.
2. Utility
2.1 Disc Information
Display the information of the media installed on each device. Such as USB,
DVD/CD/BD, flash memory format and content size.
[ 3 ] USB
FAT32 72MB
[ 3 ]
: the number of the device port
USB
: the type of device
FAT32
: the file format
72MB
: data used on the device
2. Utility
[Utility]
1. Disc Information
[ 1 ] 1Track
Data CD 702MB
[1 ]
: the number of the device port
CD
: the type of device
702MB
: data capacity of the device
ENT
ENT
6
This function shows the drive info that is connected to each internal port of the
controller. Information includes the port number that each drive is assigned to, brand
name and model of each drive and drive firmware version.
2.2 Drive Information
[# 1 ]
: the number of device
P : 1
: device’s port number
1.00
: the version of device
ASUS DRW-24F1ST
: device
model number
[# 2 ]
: the number of device
P : 2
: device’s port number
8.07: device’s model number
Press
to switch info.
[# 1 ] P : 1 1.00
ASUS DRW-24F1ST
2. Utility
[Utility]
2 .Drive Information
[# 2 ] P : 2
USB Sandisk 4GB 8.07
ENT
ENT
2.3 System Information
2.4 Update BIOS
Press
to switch info.
ID number
XXXXXXXXXXXXXXX
A0103B
: controller model
128MB
: system memory
V
2.00.55: firmware version
XXXXXX
: controller’s ID.
2. Utility
[Utility]
3. System Information
A0103B 128MB
v2.00.55
This function displays the information of the controller board installed in the copier
section. Information displayed will be the controller model and firmware version.
This command allows you to update the firmware of the Copier section when
necessary. AEGT will automatically supply you with the latest firmware. Normally on
a CD. Once the update process is completed, the Copier will reboot automatically to
activate the new firmware.
ENT
ENT
Note
:
2. Utility
[Utility]
4. Update BIOS
[Update BIOS]
Reading....
[Update BIOS]
Complete! Reboot!
1. Please insert the disc with firmware to Copier DVD/CD/BD device.
2. DO NOT put the firmware files in a folder.
ENT
ENT