Adam S6A Mk2 Operation Manual Download Page 2

2

Introduction

Dear customer,

Congratulations on choosing an ADAM Audio S6A Mk2 main monitor!

ADAM loudspeakers are built for maximum quality reproduction and audio 
perfection. With the S6A Mk2 you have selected one of the most ambitious 
speaker systems available. This main monitor meets highest expectations in 
sound quality and craftmansship.

This  manual  is  intended  to  provide  you  with  information  about  your  new 
ADAM.  It  contains 

important  information  regarding  safety,  setting  up, 

handling, and warranty. We request that you read these sections carefully 
to ensure an easy set up and to prevent potential problems.

The S6A Mk2 is suitable for main monitoring. It is perfectly suited for large 
control rooms, post-production suites, etc.—an ideal tool for situations where 
a combination of no-compromise sound reproduction and high SPL regions 
is required.

The  S6A  Mk2  is  a  four-way  ported  active  system  that  uses  a  single  ART 
tweeter and two ART midrange drivers, ensuring full compatibility with the 
latest expanded high frequency resolution media formats. It also employs two 
7“ HexaCone

©

-midwoofers and two  12“ HexaCone

©

-subwoofers. Driven by 6 

amplifiers with an overall power of 1000 watts (RMS), the S6A is powerful 
enough for rooms of almost any size.

If you have any questions about this or any of our products, please don’t hesi-
tate to contact us–we will be happy to assist you in any possible way.

For detailed information concerning the ADAM technologies and products, 
complete reviews, and a list of worldwide ADAM users and studios, please 
visit our website:
www.adam-audio.com

We hope very much that you really enjoy your new loudspeakers, and wish 
you many delightful hours with them.

The ADAM Audio Team

Summary of Contents for S6A Mk2















Reviews: