Adam S2.5A User Manual Download Page 3

Manual S2.5A - page 2 of 12 

Manual S2.5A - page  of 12 

You will lose room information!

Not so:

More recommendations:

•  No obstacles in the way from the sound to your ears. You should be able to see  
 

the speaker completely.

•   Distance  to  the  walls  should  be  at  least  40  cm  to  avoid  early  reflections,  
 

which will „smear“ the sound in time.

•   Tweeter should be positioned approximately at the height of your ears. 
•   When you start listening keep all panel settings in their original linear position.  
 

You should listen to various recordings first, especially untreated material, that  

 

should sound natural, where only little or no equalisation or dynamic correc- 

 

tion has been applied. After some experience you will be better prepared to  

 

eventually adapt to the room acoustic.  

Transportation

If you have to send your speaker to any other location, it is of vital interest to have 
the original packaging materials as experience shows that it is very difficult to avoid 
damages if you have to send them without these. We will not be responsible for 
damages due to improper packaging.

Have fun ...

We very much hope that you enjoy your new monitors and their unique transducer 
design. If there are questions, please do not hesitate to contact us - we will be 
happy to advise you.

The ADAM people.

Summary of Contents for S2.5A













Reviews: