Adam P22A Operation Manual Download Page 14

14

10.

 

Safety Instructions

Please  read  the  following  safety  instructions  before  setting  up  your 
system. Keep the instructions for subsequent reference. Please heed 
the warnings and follow the instructions.

Do not open the loudspeaker. There are no user-serviceable parts inside. In case of a problem, 
please contact either your ADAM dealer or us. We are happy to help. Always refer servicing to 
qualified personnel and never attempt to repair this product yourself.

This product, as well as all attached extension cords, must be terminated with an earth ground 
three-conductor AC mains power cord like the one supplied with the product. To prevent shock 
hazard, all three components must always be used.

Protect the cord from being walked on or pinched.

Never replace any fuse with a value or type other than those specified. Never bypass any fuse.

Always switch off your entire system before connecting or disconnecting any cables, or when 
cleaning any components.

Please note that the diaphragms build up a magnetic field. Do not ply with magnetic items at 
close range to the diaphragms.

Do not expose this product to rain or moisture, never wet the inside with any liquid and never 
pour or spill liquids directly onto this unit. Please do not ut any objects filled with liquids (e.g. 
vases, etc.) onto the speaker.

Always use fully checked cables. Defective cables can harm your speakers. They are a common 
source for any kind of noise, hum, crackling etc.

Always keep electrical equipment out of the reach of children.

Always unplug sensitive electronic equipment during lightning storms.

The  monitor should be installed near the socket outlet and disconnection of the device should 
be easily accessible.

To completely disconnect from AC mains, disonnect the power supply from the AC receptacle.   

Never use flammable or combustible chemicals for cleaning audio components. 

Avoid touching the speaker membranes and do not block the woofer’s ventilation ports. 

Never expose this product to extremely high or low temperatures. Never operate this product in 
an explosive atmosphere.

High SPL’s may damage your hearing! Please do not get close to the loudspeakers when using 
them at high volumes.

Assure free airflow behind the speakers to maintain sufficient cooling.

Summary of Contents for P22A

































Reviews: