0 4
SECTION 01
PLEASE DO NOT OBSTRUCT THE AIR VENTS OF THE ELECTRIC STOVE
This appliance has a ‘self resetting’ safety cut out system. To prevent overheating,
ensure the air inlets and outlets are not obstructed. If the safety cut-out operates,
switch off the electric fire and allow to fully cool down. Remove any obstruction
before re-use.
IMPORTANT ELECTRICAL SAFETY
The stove must not be located under an electrical socket; the socket must always be
accessible in order to disconnect the heater from the electrical supply for
maintenance and cleaning. Never cut off the plug and hard wire into a fixed fused
spur.
IMPORTANT!
• Do not spray liquids directly onto any surface of the unit.
• This stove must be earthed. The supply cord must be safely routed from the
fire to an electrical socket.
• If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have had supervision or instruction concerning use of
the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
• The plug must be accessible after installation to allow for isolation in an
emergency.
Warning: In order to avoid overheating,
DO NOT COVER THE HEATER
Note:
Any new wiring required, must be In accordance with local and national
codes and other applicable regulations in order to reduce the risk of fire, electric
shock, or other injuries.
Note:
When the stove is turned on for the first time or when it has not been used for
some time, it may release a slight, harmless odour. This odour is a normal
occurrence caused by the initial heating of the internal heating elements and
will disappear with use