© Adam Equipment Company 2007
15
8.2.7
F7
-A/D COUNT
To enter this parameter, press the
[Tare]
key when “
F7
” is shown.
This parameter allows you to view the A/D counts from the internal A/D converter. This can
be an aid to service.
Press the
[Tare]
key to return to the PARAMETER menu.
Press the
[Zero]
key to return to weighing.
Typical value at zero is 30,000-90,000 (approx.)
Typical value at full capacity is 500,000 (approx.)
8.2.8
F8
–ZERO
This parameter allows the normal method of setting zero.
To enter this parameter, press the
[Tare]
key when “
F8
” is shown.
The display will show the current settings, “
modE 1
” or “
modE 2
”.
Press the
[U.Wt./Units]
key to change and press
[Tare]
to accept the value.
Press
[Zero]
to return to weighing.
8.2.9
F9
–PIN
This parameter allows setting of password to enter these Service Parameters.
To enter this parameter, press the
[Tare]
key when “
F9
” “
Pin
” is shown.
The “
WEIGHT
” display will show "
Pin 1
"
Enter the new password. The “
Unit Weight
” display will show dashes. Press
[Tare]
.
