Adam 31102500 User Manual Download Page 6

6

TELESCOPIC CEILING MOUNT

DANGER!

Dropping the speaker system may cause injury and  
property damage.

There is a risk that the speaker system could fall down until 
the mounting accessories on the telescopic boom 

E

 are finally 

fixed. As long as this installation has not yet been carried out, 
the speaker system must be held by another qualified specialist. 
The above requirements also apply to this specialist. In addition, 
you must provide an additional safety means to prevent the 
speaker from falling down.

–  Unscrew the lens screw 

D

, which secures the inner part to 

the telescopic boom 

E

.

–  Pull out the inner part of the telescopic boom 

E

 until the 

desired distance from the ceiling is reached.

–  Secure this setting by tightening two of the lens screws with 

a torque of 15 Nm.

→  Do not place the loudspeaker into the desired angle of inc-

lination until it is fully connected to the ceiling bracket and 
mounting hardware and the securing screws are tightened.

→  Attach the loudspeaker provided with mounting accessories 

to the ceiling bracket. Please follow the instructions below.

Summary of Contents for 31102500













Reviews: