© Adam Equipment Co Ltd 2018
10
4.0 OPERATION
4.1
ZEROING THE DISPLAY
Steps:
1) You can press the
[Zero]/
0
Esc
key when no tare is entered to set the zero point
from which all other weighing is measured.
2) When the zero point is obtained the
Weight
window will show an arrow next to the Zero
legend marked under the
Weight
window.
3) The scale has an automatic re-zeroing function to account for minor drifting or
accumulation of material on the platform. However you may need to press
[Zero]/
0
Esc
if weight is displayed whilst the platform is empty.
4.2
TARING
Taring is used to eliminate the weight of a container so that only the net weight is displayed.
Steps:
1) Zero the scale by pressing
[Zero]/
0
Esc
if necessary. The zero indicator will be on.
2) Place an empty container on the platform. The weight of the container will be displayed.
3) Press
[Tare]
↵
to zero the scale. The displayed weight is then stored as the tare value
and that value is subtracted from the display, leaving zero on the display. The
Net
indicator will now show. As product is added only the weight of the product will be shown.
4) When the product and container are removed the weight window will show a negative
value. To use a different container, remove this negative tare value by pressing
[Tare]
↵
once more.
