25 |
P a g e
© Adam Equipment Company 2010
9.2
STANDARD FORMAT
The balance will print the following data as the standard form. The standard form
cannot be changed. The format of the custom forms #1 and #2 will be the same as
the standard form until modified by the user.
Line 1
Date
Line 2
Time
Line 3
Blank line
Line 4
ID number
Line 5
Blank line
Line 6
Result
Line 7
Blank line
Line 8
Blank line
This will result in a printout that looks like:
NOTE:
The format of the results line will change depending on the mode in which the
balance is operating, e.g.
Normal weighing, Check weighing: “123.456 g”
Parts counting: “1234 pcs”
Percent weighing: “12.345 %”
9.3
INPUT COMMANDS USING REMOTE KEYS
The balance can be controlled with the following commands sent using remote keys
such as from a PC. The commands must be sent in upper case letters, i.e.
“KT”
not
“kt”
. Press the Enter key of the PC after each command (the action of Carriage
Return is denoted as <CR> as shown below).
Date: 23/09/04
Time: 15:45
ID No: 123456
