©Adam Equipment Company 2009
15
5.3
SETTING THE BACKLIGHT
The backlight may be enabled or disabled by the user. If the backlight is disabled, the
battery life will be longer.
The following settings are available:
1 BL
Sets the backlight to operate automatically when a weight is
placed on the scale or a key is pressed.
2 BL
Sets the backlight to be on at all times.
OFF BL
Sets the backlight to be off.
1) To set this parameter turn the power off press and hold the
[Recall/Tare]
key then
press the
[On/Off]
key once, then release the
[Recall/Tare]
key.
2) After a few seconds, the display will show the first function PWR
3) Press the
[S/P/CE]
key until you the display shows you XX BL where XX is last
setting
4) Press
[Recall/Tare]
to select the settings as follows 1 BL - 2 BL – OFF BL
5) Press the
[S/P/CE]
key to confirm the setting
6) To exit turn the balance off and back on again
