"
L-On
" means auto backlight function is active.
"
L-OFF
" means this function is inactive, i.e. backlight is shut off.
•
Turn off the power and then turn it on again to enter the normal
weighing mode.
7.3 UNITS SELECTION (FOR AQT 200 ONLY)
•
Next press
[Unit]
to enter the units selection mode, the display will
show "
On ct
".
•
Press
[Tare]
to select
On
or
OFF
.
On
means this weighing unit is enabled,
OFF
means this unit is disabled.
•
Press
[Unit]
to go to the next weighing unit. The following weighing
units can be selected in sequence.
ct – oz – dwt – tL.H – tL.S – tL.T (
Note:
g is always activated)
•
Turn the balance off and back to on again to return to normal
operation.
© Adam Equipment Company 2005
NOTE:
It is recommended that the balance is used in a location with
sufficient light so that the backlight function can be turned off to
maximise the battery life.
