Audio Design Associates, Inc. SR-X Tuner
31
Technical Specifications
Power
12 V DC @ 1000 mA
Typical 400 ma @ 12.7 V DC
Center Pin Positive
Trigger out
10 – 12 V DC @ 100 ma Max
2 pin – Pin 1
+ Pin 2
Output
Max out 2.3 V RMS Variable
RCA
R = Right = Red
L = Left = White
Output Impedance
50
Ω
– 600
Ω
Force Mono Switch
(Analog only)
R = R + L
L = L + R
Optical Output
TosLink™
RS-232 Mini
Jack\DB9
Tip – Pin 3
Ring – Pin 2
Sleeve – Pin 5
Satellite Antenna Input Type F
Audio Design Associates, Inc. SR-X Tuner
4
Servicing – Do
not
attempt to service this product yourself; there are
no customer serviceable parts inside. Refer all servicing to qualified
service personnel.
Damage Requiring Service – Unplug this product from the wall outlet
and refer servicing to a qualified service person under the following
conditions:
o
When the power-supply cord or plug is damaged.
o
If liquid has been spilled, or objects have fallen into the
product.
o
If product has been exposed to rain or water.
o
If the product does not operate normally by following the
operating instructions.
o
If the product has been dropped or damaged in any way.
o
When the product exhibits a distinct change in
performance – this indicates a need for service.
Replacement Parts – When replacement parts are required, be sure the
service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, shock, or other hazards.
Safety Check – Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Heat – The product shall be situated away sources such as radiators,
heat resistors, heat registers, stoves, or amplifiers that produce heat.
Technology - It is prohibited to copy, decompile, disassemble, reverse
engineer, or manipulate any technology incorporated in this product.
The user of this or any other software contained in an Audio Design
Associates, Inc. product is explicitly prohibited from attempting to
copy, decompile, reverse engineer, or disassemble the object code, or
in any other way convert the object code into human-readable form.
The software is licensed solely for use within this product.
