ADA INSTRUMENTS GD-16 HERCULES, Operating Manual, Page: 11 / 25

11 English
rect, consequential damage, and loss of profits.
The manufacturer, or its representatives, assumes no responsibility for
consequential damage, and loss of profits by any disaster (earthquake,
storm, flood ...), fire, accident, or an act of a third party and/or a usage in
other than usual conditions.
The manufacturer, or its representatives, assumes no responsibility for
any damage, and loss of profits due to a change of data, loss of data and
interruption of business etc., caused by using the product or an unusable
product.
The manufacturer, or its representatives, assumes no responsibility for
any damage, and loss of profits caused by usage other than explained in
the operating manual.
The manufacturer, or its representatives, assumes no responsibility for
damage caused by wrong movement or action due to connecting with oth-
er products.
WARRANTY DOESN’T EXTEND TO FOLLOWING GASES:
- damage to products or parts caused by misuse, including, without limitation,
misapplication or nrgligence of the terms of service instruction. Usage of ex-
pendable materials (oil, belt fuel mixture, filters, plugs|) that are not recom -
mended by factory. Or if the instrument was exposed to the self-dependent
repair or disassembling during warranty period;
- the instrument that has damages, defects because of outer mechanical, ther-
mal, chemical effects, unproper maintenance, storage or acts of God;
- defects caused by reasons that are not depended on the manufacturer, such
as usage of fuel that has inadmissible state standard, usage of oil and mixture
of inadmissible quality;
- instrument has damages caused by presence of any liquids and foreign objects
inside the product. Ventiducts, fuel and oil holes are clogged up;
- normal runout of the instrument, inner or outer clogging;
- the instrument is overload (continuous operation with max load) that leads to
the breakage of piston-cylinder-unit;
- the instrument with breakage of piston-cylinder-unit because of continious
operation at idle;
- damaged parts as a result of operation with unrepaired defects caused by
service support, repair or modifications by anyone other than an authorized
service center;
- periodic maintenance (cleaning, adjustment, filter replacement and so on);
- if the standard or serial product number (if available) will be changed, erased,
removed or will be unreadable;
- parts: chains, filters, details of adhesion, cutters, disks, cords, driving belts,
shock-absorbers, details of starter group, gear-wheels, drive shafts of the gear
case, plugs, fuel filters, bearings, that don’t have visible defects and also life time
of details that depends on regular maintenance of the instrument.