ADA INSTRUMENTS CUBE 360, Operating Manual

Page: 3 / 36

3
THE MANUFACTURE RESERVES THE RIGHT TO MAKE CHANGES (NOT
HAVING AN IMPACT ON THE SPECIFICATIONS) TO THE DESIGN,
COMPLETE SET WITHOUT GIVING PRIOR WARNING.
APPLICATION
Line laser ADA Cube 360 is designed to check the horizontal and vertical
position of the surfaces of the elements of building structures and also
to transfer the angle of inclination of the structural part to similar parts
during construction and installation works.
SPECIFICATIONS
Laser beam ................................................ Horizontal line 360° vertical line
Light sources ............................................. 2 laser diodes with laser emission
wave length of 620-690nm
Laser safety class ..................................... Class 2, <1mW
Accuracy ..................................................... ±1/8 in at 30 ft (3 mm/10 m)
Self-leveling range ................................... ±4°
Operating range with/without receiver ...... 230/65 ft (70/20 m)
Power source ............................................ 3 alkaline batteries, AA type
Operation time ......................................... Approx.5-8 hours, if everything is on
Tripod thread ............................................ 2x1/4”
Operating temperature ......................... 23º F to 113º F (-5°C +45°C)
Weight ...........................................................0,79 lb (390 g)
LASER LINES
FEATURES
1. Laser lines on/off
2. Indoor/outdoor operating mode
3. Battery compartment
4. Tripod mount 1/4’’
5. Compensator switch (ON/X/OFF)
6. Vertical laser window
7. Horizontal laser window
English
1
2