ADA INSTRUMENTS A00685, Operating Manual, Page: 5 / 28

5 English
BASIC OPERATIONS
Photo-taking
In the live surveillance interface, short
press the “Trigger” button to take a
photo, and then press the “ ”
button to save the photo or the “ ”
button to delete it according to the
prompt on the interface.
View and removal of pictures
1. Short press the “ ” button
to access the menu.
2. Select the photo column by
pressing “ ” buttons.
3. Short press the “ ” button
to display the photo file.
4. Shortly press the “ ”
button to view the photos.
Press buttons Up or Down (if
necessary) to display another photo.
5. To delete a photo, press shortly the “ ” button in the photo
preview interface.
File export
1. Open the USB cover on the top of the device.
2. Connect the USB cable with the computer.
3.
Access the disk folder of the computer, select the photo to be exported,
copy it to the computer, and view the photo file through the analysis
software.
4. After the copy is done, disconnect the USB cable from the computer.
Setting temperature measurement parameters
The temperature measurement parameters will affect the accuracy of the
measured temperature, so these parameters should be set before the
measurement.