Ad Notam DSTB-S2, User Manual

Page: 5 / 28

5
GENERAL INFORMATION - INSTALLATION
Operation and Storage Requirements
The ambient temperature for operating the device is b5 and +50 degrees Celsius. Do not install the device
in the proximity of heat sources, such as heating pipes, heaters, furnaces or other devices, which radiate heat.
Mount the device in such a way that it is protected against moisture. Trouble free operation is ensured up to 75% air
humidity.To prevent fi re or electric shock, never allow liquids to enter the unit. The product must be stored in dry and
well-ventilated rooms, without extreme temperature fl uctuations. Heat sources and aggressive active substances may
not be stored in the proximity of the device. The required storage temperature is 0°C - +60°C at an air humidity of
5 - 85% RH. The device must be stored in the complete packaging, as delivered.
Installation
Have this product installed by qualifi ed staff only. Use the mounting systems which are specifi ed or recommended
by ad notam. Install the product in a way that it is fi xed properly and take care that children are not exposed to dan-
ger. Please take extra care during installation, avoid impacts. Before cabling your device, check that the power is off.
To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. Use of power
cords or adapters other than those provided may cause fi re or malfunction. Place this product as close to the power
socket as possible. Leave enough space to insert and remove the power plug on demand. Even if you switch off the
product with your remote control, power is not cut off unless the power cord is unplugged.
Installation Environment
Avoid direct light or sun exposure, direct proximity to heat sources, outdoor installation. The product is specifi cally
designed for indoor use only. There is the danger of fi re and of electric shocks and damage to the device, if it is
operated outdoors. Do not place any heat sources such as radiators and heat registers, etc. near the device.