1. Opel Karl OEM dash board
2. Unclip OEM panel
Unplug hazard light switch
and remove OEM panel
4. Remove 4 clamps from OEM panel
Place4 clamps onto new facia plate
3. Remove 2 screws of OEM head unit
(see arrows). Put the OEM screws
aside because they will be used later
Unplug all connectors
Remove OEM head unit
5. Unclip and remove
hazard light switch
from OEM panel
6. Unclip and remove air vents
from OEM panel
7. Place air vents onto
new 2-DIN facia plate
8 . Place hazard light switch
onto new 2-DIN facia plate
7 mm
