2
1.
Safety Information and Warnings
This section contains important information regarding the safe installation and operation of the
Acuva Technologies UV-LED Water Purification Systems
(the “device”).
Please read carefully.
Installation or operation of the device in a manner contrary to this manual may result in property
damage or personal injury.
Acuva recommends that the device be installed by a qualified technician.
1.1
Warnings and Safety Precautions
Danger
•
As a precaution to avoid system damage, plug the Smart Faucet electrical connection
into the UV device prior to connecting the main power cord.
•
Do not store the device in freezing conditions.
•
Do not allow water to freeze in the device.
•
Do not use the device if damaged or dropped.
•
Do not submerge the device under water.
•
Do not connect to AC power without a power inverter; this device uses 12V DC only.
•
Do not plug the Arrow systems in backwards (The Eco can flow in either direction).
•
This product is not ignition protected. Do not install in the engine compartment or
other areas where explosive vapours may be present.
Warning
•
A steady blue light on the Smart Faucet and the device while the faucet is open is the
only indication that the water is safe to drink. If the blue light is not on while the
faucet is open, please check the “trouble shooting” section of this manual.
•
The UV device includes fragile parts, including parts made from glass. The device
should not be dropped and must be transported/carried with sufficient care.
•
The quality of the input water is critical for the efficient performance of the device.
Please see section 1.2 for details.
•
Install the device at an accessible and visible location for continuous monitoring of
the system status using LED indicators and/or in case of any leakage.
Caution
•
Minor condensation may occur on the device in humid weather and with cold water
temperatures (<dew point temperature). Condensation drip may be noticed.