6
Intelli-Time
®
Clock
Intelli-Time clock and calendar are pre-programmed to the correct time and
date, and update automatically for Daylight Saving Time. All you need to do is
select your time zone during clock setup.
Set the Time, Date & Units
Press and HOLD the “SET” button, located on the side of the clock until
"SELECT TIME ZONE" appears on the display to enter SET MODE. Once in
SET MODE the preference you are currently setting will blink on the clock.
To adjust the currently selected (flashing) item, press and release the “ ” or
“ ” buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:
TIME ZONE (see table below)**
AUTO DST (ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
You will automatically exit SET MODE if no buttons are pressed for 5 seconds.
Enter SET MODE at any time by pressing and holding the “SET” button until
"SELECT TIME ZONE" appears on the display.
*If you live in an area that observes daylight saving time, DST should be set
to ON.
**Time zone preference set order is as follows:
Time Zone
Clock Setting
ACST, CST
A
AEST, EST
B
AWST, WST
C
CWST
D
CXT
E
LHST
F
NFT
G
