12
Programmable Alarms
This display features programmable alarms that sound an alert to notify you when a value
(for outdoor temperature, humidity, wind speed or rainfall) has been reached or exceeded.
When an alarm is triggered, the display emits an audible beep and flashes data in the
affected category. You can customize the alarms by turning ON or OFF the alarms you’d
like activated or deactivated, and by inputting your own values to trigger the alarm.
Setup an Alarm
1. Press and release the "
" button until the reading for which you wish to set an
alarm is shown on the display. "
" will be shown.
2. Press and release the " " or " " buttons until "
" appears.
3. Press and release the " " button. The current alarm value will flash on the display.
4. Press and release the " " or " " buttons to adjust the alarm’s value.
5. Press and release the "
" button to save the alarm value.
6. Press and release the " " button to cycle to the next reading.
Disable an Alarm
1. Press and release the "
" button until the reading for which you wish to disable an
alarm is shown on the display. "
" will be shown.
2. Press and release the " " or " " buttons until "
" appears.
3. Press and release the "
" button to cycle to the next reading.
4. Repeat steps 1-3, as needed.
NOTE:
To disable ALL alarms at once, press and HOLD the "
" button for 10 seconds.
You will automatically exit alarm SET MODE if no buttons are pressed for 10 seconds.
Enter alarm SET MODE at any time by pressing the "
" button.
