AcuRite 06057, Instruction Manual

Page: 5 / 16

5
1
Display Setup
AcuRite recommends high quality alkaline batteries for the best product performance.
Heavy duty or rechargeable batteries are not recommended.
Set the A-B-C Switch
3
2 Plug Power Adapter into
Electrical Outlet
The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
Install or Replace Batteries
choices for both the sensor and
(optional)
the display in order for the units
Insert 6 x AA alkaline batteries into the
to synchronize.
battery compartment, as shown. Follow
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that is not to be
the polarity (+/-) diagram in the battery
compartment.
A B C
IMPORTANT:
Batteries are a backup power source to preserve records in the event of
a power outage. Power adapter is the recommended primary power source to enjoy
the full functionality of this product.
3 Install Backup
Batteries
(optional)
6 AA Batteries
2
Plug in Power
Adapter
1
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.