6
USB Mode 2: Display Logging OFF (DEFAULT)
•Display unit DOES NOT log (save) any data in memory for PC transfer.
USB Mode 3: Display Logging ON/Internet Bridge Mode
•Display unit logs (stores) up to 2 weeks of data in memory.
•Transfer data to your PC using PC Connect.
•Stream your data from your weather center to online sources.*
USB Mode 4: Display Logging OFF/Internet Bridge Mode
•Display unit DOES NOT log (save) any data in memory.
•Stream your data from your weather center to online sources.*
* PC and internet connection must remain ON to continuously stream data
from your weather center to online sources or the AcuRite mobile app.
Set the PC Connect USB Mode
1. Press the “
▲
“ or “
▼
“ buttons until “SET USB MODE?” is
displayed on the Selectable Category part of the display
unit.
2. Press the “ ” button to set the mode preference.
3. Press the “
▲
“ or “
▼
“ buttons to select the USB mode.
4. Press the “ ” button to confirm your selection.
PC Connect USB Mode is now set.
Download the PC Connect Software
The PC Connect software is available online as a free download. An instruction
manual for PC Connect is included (PDF file) when you download the software.
Read the manual to learn how to setup PC Connect preferences and features.
Download PC Connect software to your computer by visiting:
http://www.AcuRite.com/pc-connect-download
Or, you can navigate to the page above using the following path:
www.AcuRite.com > Support > Manuals & Downloads > Downloads > PC Connect
Click the “setupacu-link” file you downloaded and follow the on-screen
instructions to install the PC Connect software. A folder named “AcuRite”
will be installed on your computer.
After PC Connect is installed on your
computer, open the PC Connect app. Verify
that the display unit is powered on with
the AC power adapter plugged in, then
connect the small end of the USB cable into the USB port located inside the
battery compartment on the back of the display unit.
1
2
3
