background image

Care & Maintenance 

Display Unit Care 

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep 

away from dust, dirt and moisture. Clean ventilation ports regularly with a 

gentle puff of air.

 

Outdoor Sensor Care 

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

 

Specifications

 

TEMPERATURE RANGE 

Outdoor: -40

º

F to 158

º

F; -40

º

C to 70

º

Indoor: 32

º

F to 122

º

F; 0

º

C to 50

º

INDOOR HUMIDITY 

16% to 98% 

WIRELESS RANGE 

165 ft / 50 m 

depending on home construction materials

 

WIRELESS FREQUENCY 

433 MHz 

POWER 

Display: 3 x AAA alkaline batteries

 

Sensor: 2 x AA alkaline or lithium batteries

 

DATA REPORTING 

30 seconds 

FCC Information 

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 

rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. 

Such modifications could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

 

10 

Summary of Contents for 02045W













Reviews: