3
Weather Underground
TM
is a commercial weather service providing real-time
weather information via the Internet. Weather Underground
TM
provides weather
reports for most major cities across the world on its website, as well as local
weather reports for newspapers and websites. Its information comes from the
National Weather Service, and over 250,000 personal weather stations.
About Weather Underground
TM
Wi-Fi Setup for Weather Underground
TM
This weather station features wireless Internet connectivity in order to connect
and send your data to Weather Underground
TM
. If you do not already have a
WU (Weather Underground
TM
) account, please create your account at
wunderground.com prior to the following Wi-Fi setup.
*This weather station display only supports 2.4 GHz wireless networks.
4. Open your web browser on the device that is
connected to the AcuRite display. Type "192.168.4.1" in the address bar
and hit enter to access the AcuRite WiFi display settings website.
5. Enter or select your wireless network name, network password, and the
WU Station ID and Station Key/Password (created in step 1).* Press "Save
and Reset" to save your settings.
6. Confirm “ ” is shown on the display. If you see “
x
” instead, refer to
the Troubleshooting section (see page 16).
7. Once connected, data from your 5-in-1 sensor will automatically begin
to upload to Weather Underground
TM
. Monitor sensor data remotely at
www.wunderground.com or from a mobile device using the Weather
Underground
TM
app, available from the iOS App Store or Google Play Store.
2. Power on the display (using included power cord).
3. Connect to the Wi-Fi signal (named AcuRite 01538)
of the AcuRite display from your computer or
mobile device. When prompted for a password,
enter the device ID, located on the back of the
display in the battery compartment
(Example: 24C86EXXXXXX).
DEVICE ID
############
1. Add this weather station to your Weather Underground
TM
account:
Sign in to your Weather Underground
TM
account.
Navigate to My Profile > My Weather Stations > Add New PWS.
Enter all required location info.
When prompted for “Station Hardware”, select “AcuRite Pro Weather Center”.
You will be provided with a WU Station ID and Station Key/Password
once you have submitted all required info (needed for step 5, below).
